SY/T5148-1999

石油鉆采設備用氣動元件單向節流閥

　

GB/T8100-1987

板式聯接液壓壓力控制閥(不包括溢流閥)順序閥、卸荷閥、節流閥和單向閥安裝面

Hydraulic fluid power--Pressure control valves (excluding pressure relief valves ), sequence valves, unloading valves, throttle valves and check valves--Mounting surfaces

JB/T53368-1994

液壓節流閥產品質量分等(試行)

　

JB/T9081-1999

空氣分離設備用低溫截止閥和節流閥技術條件

　

JB/T53155-1999

空氣分離設備用低溫截止閥和節流閥 產品質量分等

　

JB/T10368-2002

液壓節流閥

　

NF P43-000-2003

建筑物閥門.建筑物中飲用水供應用銅合金節流閥.試驗要求.國家標準補充

(Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements - National complement.)

NF R16-316-1989

道路車輛.帶凸緣和節流閥式試驗噴咀

(Road vehicles. Calibrating nozzle, delay pintle type.)

NF E48-423-2001

液壓傳動.減壓閥、順序閥、卸載閥、節流閥和止回閥.裝配面

(Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces.)

BS ISO 5781-2000

液壓傳動.減壓閥、順序閥、卸荷閥、節流閥和止回閥.安裝面

(Hydraulic fluid power - Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces)

JIS B8664-2001

液壓動力.壓力控制閥(不包括減壓閥)、順序活門、釋荷閥、節流閥和止回閥.安裝表面

(Hydraulic fluid power -- Pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves -- Mounting surfaces)

JIS B8653-2002

比例電動液壓節流閥試驗方法

(Test methods for electro-hydraulic proportional metering valves)

ISO 5781-2000

液壓傳動.減壓閥、順序閥、卸荷閥、節流閥和止回閥.裝配面

(Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces)